#
Call: 704-786-1700

reo temp logo

REOTEMP Instrument Corporation was established in 1965 and is located in San Diego, California. REOTEMP is recognized as a leading manufacturer of temperature and pressure instrumentation. We provide bimetal thermometers, pressure gauges, diaphragm seals, RTD’s & thermocouples, pressure transmitters, compost thermometers, and related accessories to a variety of process markets worldwide

Thermocouples and RTDs are the most widely used and varied of all temperature sensors. REOTEMP manufactures a complete line of standard and custom probes and assemblies to meet the demands of today’s industries.

thermocouples -rtd
Thermocouples – RTD’s

RTD’s Thermocouples Configurator

RTDs & Thermocouples

  • rugged, reliable, highly-accurate
  • ease of ordering, and fast turnarounds
  • exceptional service and support.

General features:

  • Complete Thermowell assemblies, Transmitters assemblies
  • Full Line of Connection Heads – Aluminum, Stainless Steel, Iron, general purpose and explosion-proof.
  • Spring-loaded and welded threaded process connections, various nipple and union combinations
  • Standard and mini connector probes
  • Leadwires in fiberglass, Teflon, PVC, SS armor and overbraid protection
  • Handheld probes
  • Plastics Industry assemblies
  • Sanitary process probes
  • Cut-to-length sensors
  • Custom solutions for your application

Thermocouple features:

  • Ceramic insulated thermocouples
  • Sheaths 304SS, 316SS, 310SS, Inconel 600
  • Diameters .020″ to 1/2″
  • Metal and ceramic protection tube assemblies
  • Weld pad assemblies
  • High-temperature noble metal thermocouples

RTD features:

  • Platinum, Nickel, Copper RTDs , Thermistors, various tolerances, ranges, curves
  • High Accuracy, High vibration

REOTEMP pressure gauges, manufactured under ISO 9001 quality standards, are available in a wide variety of sizes, ranges, and configurations to meet the demands of any application.

series pr

Series PR

  • Industrial All-Welded Stainless
    Steel Gauges

series pt

Series PT

  • Process Gauges

hi-vis dials

Pressure Accessories

  • Hi-Vis Dials

series pc

Series PC

  • Low Pressure Capsule Gauges

series sg

Series SG

  • Sanitary Gauges

series pl

Series PL

  • Test Gauges

series pg

Series PG

  • Stainless Steel Case with Brass Internals

series pm

Series PM

  • Stainless Steel Gauges with crimped bezel

series pd

Series PD

  • Utility Gauges

series 20

Series 20

  • Differential Gauges (piston design)

series 40

40

series 42
42

Series 40 & 42

  • Differential Gauges (diaphragm design)

series 30

Series 30

  • Differential Gauges (vacuum or pressure)

series 05,06,09

Series 05, 06, 09

  • Differential Gauges (high accuracy)

color band dials

Color Band Dials

custom logo dials

Custom Logo Dials
Needle Valves
Snubbers
Misc accessories

Diaphragm seals use a flexible barrier, or diaphragm seal, to isolate a pressure sensor (such as a gauge or transmitter) from the process fluid. The REOTEMP diaphragm seal is available in many configurations. Selection of the proper diaphragm seal for a given application is very important for safety and performance. We will be glad to assist you in selection of the most effective diaphragm seal system for your application.

all welded process diaphragm seal gauge

NEW All-Welded Process Diaphragm Seal Gauge™

standard offline diagphragm seal

Standard Offline Diaphragm Seal

annular oring diaphragm

Annular/O-ring Diaphragm

REOTEMP TRANS-P LINE Pressure Transmitters and Transducers all convert applied pressure to an electrical signal that can be interpreted by a computer or other interpretive device, where it can be used to display or control a process variable. Ranges from vacuum to 60,000 psi.

 

series tc6

Series TC6 Pressure Transmitter
General Purpose pressure transducer/transmitter
Acccuracy: ± 1.0% or ± 0.25%
Output: 4-20mA, or voltage

series tg

Series TG Pressure Transmitters
General Purpose pressure transducer/transmitter
Acccuracy: ± 0.5% or ± 0.25%
Output: 4-20mA, or voltage
Adjustment :± 10% of full scale, zero and span

series th

Series TH Pressure Transmitters
Heavy Duty
Accuracy: ± 0.25% or ± 0.12%
Output: 4-20mA, or voltage

series tm

Series TM Pressure Transmitter
General Purpose (OEM)
Accuracy: ± 0.5%
Output: 4-20mA, or voltage

series tx

Series TX Pressure Transmitters
Intrinsically Safe pressure transmitter
Accuracy: ± 0.25% or ± 0.12%
Output: 4-20mA, or voltage

series ths

Series THS Pressure Transmitter
Sanitary pressure transmitter
Accuracy: ± 0.25%
Output: 4-20mA, or voltage

series ts

Series TS Pressure Transmitters
Submersible pressure transmitter
Accuracy: ± 0.25% or ± 0.12%

series te

Series TE Pressure Transmitter
Explosion Proof pressure transmitter
Accuracy: ± 0.25% or ± 0.12%
Ranges: vacuum to 15,000 psi
Output: 4-20mA, or voltage

series xtdm-1

Series XTDM-1 Pressure Transmitter
“Piggyback” Digital Indicator
Accuracy: ± 0.2% full scale, ± 1 digit
Programmable Range:-1999 to 1999
Power: Loop powered. Voltage drop, 3 VDC.

series d1s

Series D1S, D2S, D1H, D2H
General Purpose Diaphragm Switch
The D1S (single set point) and D2S (dual set point) are stripped (no housing) models, well-suited for applications with the following requirements: control box installations with adjustments, up to 150 psi.

The D1H (single set point) and D2H (dual set point) are housed models, well-suited for applications with the following requirements: NEMA 4 housing, tamper-proof external adjustment, up to 150 psi.

series d1t

Series D1T, D2T
Terminal Block Diaphragm Switch
The D1T (single set point) and D2T (dual set point) are well-suited for applications with the following requirements: NEMA 4 housing with terminal strip, tamper-proof external adjustment, up to 150 psi.

series d1x

Series D1X, D2X
Explosion Proof Diaphragm Switch
The D1X (single set point) and D2X (dual set point) are well-suited for applications with the following requirements: explosion-proof, tamper-proof external adjustment, up to 150 psi.

Dia-Seal Piston Models: The dia-seal piston models combines the accuracy of a diaphragm switch with the long life and high pressure capabilities of a piston switch.

series e1s

Series E1S, E1H
Econ-O-Trol Switch
The E1S is a stripped (no housing) model, well-suited for applications with the following requirements: compact, economical, ranges from 2.5 to 500 psi.

The E1H is a housed model, well-suited for applications with the following requirements: compact, economical, NEMA 4 housing; screw terminals on limit switch; high/low control; ranges from .5 to 500 psi.

series b1s

Series B1S, B2S, B1T, B2T
Bourdon Tube Switch
The B1S (single set point) and B2S (dual set point) are stripped (no housing) models, well-suited for applications with the following requirements: high accuracy, up to 18,000 psi working pressure and 20,000 psi proof.

The B1T (single set point) and B2T (dual set point) are housed models, well-suited for applications with the following requirements: high accuracy, housed with terminal strip, tamper-proof external adjustment, up to 18,000 psi and 24,000 psi proof.

series dm

Series DM Pressure Transmitters
Panel Meter

REOTEMP Pressure Switches are well-suited to a variety of process applications where electrical devices must be turned on/off in response to changing process pressure. All models can be mounted to a variety of diaphragm seals.

Diaphragm Models:
Diaphragm models are for applications requiring accuracy of +/- 0.5% and where cycles are fewer than 25 per minute.

 

series p1h

Series P1H
Dia-Seal Piston
The P1H is well-suited for applications with the following requirements: NEMA 4 enclosure, long life, high cycle, ranges from .5 to 1,600 psi.

series p1x

Series P1X
Explosion Proof Dia-Seal Piston
The P1X is well-suited for applications with the following requirements: explosion proof, long life, high cycle, NEMA 7 & 9 enclosure, ranges from .5 to 1,600 psi.

Bourdon Tube Models:
The bourdon tube models are for applications requiring up to 18,000 psi, instrument accuracy of +/- 1% and where cycles are fewer than 25 per minute.

series dpd1t

Diaphragm Differential Models:
Diaphragm differential models are for applications requiring instrument accuracy of +/- 0.5% and where cycles are fewer than 25 per minute. Available as single or dual setting units. Differential ranges from .03 to 150 psid.

series uds3

Series DPD1T, DPD2T
Diaphragm Differential Switch
The DPD1T (single set point) and DPD2T (dual set point) are well-suited for applications with the following requirements: NEMA 4 housing with terminal strip, tamper-proof external adjustment, working ranges from .03 to 300 psi and set point ranges from .03 to 150 psi.

Solid State Models:
The solid state pressure switches are for applications requiring precise monitoring and multiple switch points. These switches provide an extremely long life.

series sw2000

Series UDS3
Multiple Output Electronic Switch
The UDS3 solid state pressure switch offers the unique ability to switch four discrete circuits in a single, compact unit.

series nn, n3

Series SW2000
Electronic Pressure Switch
The SW2000 offers the accuracy of a solid state pressure switch in two different configurations: as a dual pressure switch or as a single switch with 4-20mA output.

Static O-ring Model:
Static O-ring models offer a rugged design with a high cycle tolerance, long service life, and field-adjustable set points.

series l

Series NN, N3
General Purpose O-ring Type
The NN and N3 are well-suited for applications with the following requirements: NEMA 4 (4X), adjustable range up to 550 psi, rugged environment.

Series L
Explosion Proof O-ring Type
The series L is well-suited for applications with the following requirements: explosion proof, adjustable range up to 550 psi, rugged environment.

REOTEMP Thermowells allows the temperature sensor to be removed and replaced without dropping
pressure of losing contents, liquid gas or slurry. Each REOTEMP Thermowell is die stamped with type
of material from which it is made.

well styles

Well Styles:

  • Threaded
  • Flanged
  • Socket Weld
  • Sanitary Tri-Clamp

Shank Styles:

  • Stepped
  • Tapered
  • Straight

Materials:

  • Stainless Steel (304, 316)
  • Hastelloy
  • Monel
  • Inconel
  • Other materials

Sanitary Bimetal Thermometers

REOTEMP SANI-TEMP Bimetal Thermometer is specially designed for direct insertion into sanitary process applications when a standard thermowell is not specified or the process environment is not exposed to
pressure. The SANI-TEMP provides a quick temperature response and will mate with existing process
connections. The SANI-TEMP is ideal for the food, beverage and pharmaceutical industries.

standard features pic

Standard Features:

  • All stainless steel construction
  • All welded construction
  • Easy to calibrate reset screw
  • 3-A certified design
  • Hermetically sealed
  • F, C, or dual temperature ranges from -100F to +1000F (-70C to +500C)
  • 32 Ra max on all wetted surfaces
  • Standard connection: 1 1/2″ triclamp
  • Standard stem diameter: 1/4″
  • Standard lens: Glass

Optional Features:

  • Plastic Crystal
  • Silicone filling for vibration dampening
  • 20 Ra max
  • 3/4″, 2″, 2 1/2″ triclamp sizes
reotemp sanitary rtd's