#
Call: 704-786-1700

neptune mixer logo

gear

series HGL 430rpm Series HGL, 430 rpm
Features

  • Mounts to 2-in. coupling or flange.
  • 316SS propeller folds to fit through 2-in. opening; opens to 9-in. operating diameter.
  • 1/3 HP and 1/2 HP single-phase TEFC units supplied with 8 feet of cord and 3 prong plug.
series DT 420rpmSeries DT, 420 rpm  Features

  • Mounts to the tank or optional universal bracket.
  • 316SS propeller folds to fit through 2-in. opening; opens to 9-in. operating diameter.

optional bracket

Optional Series DT bracket adjusts to fit
32″ to 50-1/2″ wide containers

MODEL DTA–aluminum
MODEL DTS–steel

 

series rgt, 350 rpm

Series RGT, 350 rpm

Features

  • Mounts to the tank or optional bracket.
  • 316SS propeller folds to fit through 2-in. opening; opens to 9-in. operating diameter.
  • 1/2 HP single-phase TEFC units supplied with 8 feet of cord and 3 prong plug.

rgt 2 rgt 3

 

drummixers

Neptune Mixer Company offers a complete line of Bung-Entering Drum Mixers. Two styles for water-like solutions use a folding propeller. Two styles (Series H & HGS) for viscous fluids use permanent blades and are offered in higher horsepowers. All Neptune Bung-Entering Drum Mixers fit through the standard 2-in. Bung on 55-gallon drums.

Features

series E mixers• Shaft and folding propeller are 316SS. Propeller folds for entry; opens to 3 3/4-in. diameter when operating.

• All mixers are in stock for off-the-shelf delivery.

series F mixers

• Motors are available in TEFC or explosion-proof enclosures (56C frame). Air motors also available.

closed for entering open for mixing pic

highvelocity

bung enteringFeatures

• Shaft and propeller are 316SS.

• Available electric or air motor powered to 1 HP.

• For mixing extremely heavy or shear sensitive chemicals in drums.

• Designed to screw into standard 2-in. bung opening on 55-gallon drums.

• 1/3 HP and 1/2 HP

lightduty
series BN economy batch labratory mixer

 

lightdutyportable

Neptune’s premier line of small direct drive mixers for mixing small batches of low viscosity fluids.

series BNFeatures

• Mounting ease. Clamp cannot slip, preventing propeller from hitting side of tank.

• Quick, easy adjustment between “angled-on-center” and “angled-off-center” positions without tools.

• Coupling is fully enclosed.

• Motors are available in TEFC or explosion-proof enclosures (56C frame). Air motors also available.

• Off-the-shelf delivery.

• Standard shaft and prop materials:
• 316SS
• Carpenter 20
• Clamp adjusts to any angle.

lightdutyportableseriesandb

Neptune’s economy line of small direct drive mixers for small batches of low viscosity fluids.

Features

model b-4.1model b-3.1• Universal motor mount accepts 48 and 56 frame foot mounted motors.

• Motors are available in TEFC or explosion-proof enclosures. Air motors also available.

• Off-the-shelf delivery.

• Standard shaft and prop materials:
• 316SS
• Clamp adjusts to any angle.

 

lightdutyseriesl

Neptune’s Laboratory Mixers are available in air or electric drive with clamp or bracket mount. The air motors include a control valve and muffler.

Model L-1-AC includes a C-clamp and the air supply pipe passes through the C-clamp. Model L-1-A does not include a C-clamp but the air supply pipe will fit a standard one-half-inch laboratory bar clamp.

Cord and plug are standard with 1550 rpm electric models. Operating speed ranges from 200 to 2000 rpm with air motors.

lab type air mixer model l-1-ac model l-1-amodel l-1-cl

model l-1-bk

heavydutyportableheader

gear drive clamp gear drive angle mount

gear drive flange mount direct drive permanatly lubricated

heavydutyportablej6

Neptune’s most powerful mixers for the most difficult mixing applications. Grease filled gearbox eliminates oil seal and the possibility of oil contamination of process.

jg-3.0 and jg-3.4

Features
• No clutches to slip, wear or replace.

• 316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon® also available.

• Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.

• Vibration-absorbing pad standard.
• Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available.
• Gears run in grease lubrication. Cannot leak oil.

• All JG mixer shaft bearings are permanently lubricated.

• Variable speed drives also available.

• Cast aluminum housing.

• Mounting clamp has adjustable angle of entry by indexed ball-and-socket design to achieve various process results.

• Fixed cup plate mount optional on 1/3 HP through 1-1/2 HP. Standard on 2 HP and larger models.

heavydutyseriesjgr

jgr-8.1

Features

• No clutches to slip, wear or replace.

• 316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon® also available.

• Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.

• Vibration-absorbing pad standard.

• Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available.

• Gears run in grease lubrication. Cannot leak oil.

• All JGR mixer shaft bearings are permanently lubricated.

• Variable speed drives also available.

• Cast aluminum housing.

• Angle-riser mount provides a fixed 10Œ¯áŒ¯á angle of entry.

Compact mixers for the most popular mixing applications. Grease filled gearbox eliminates oil seal and the possibility of oil contamination of process.

heavydutyseriesjgf

jgf-8.1

Features

• No clutches to slip, wear or replace.

• 316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon® also available.

• Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.

• Vibration-absorbing pad standard.

• Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available.

• Gears run in grease lubrication. Cannot leak oil.
• All JGF mixer shaft bearings are permanently lubricated.

• Variable speed drives also available.

• Cast aluminum housing.

• Flange stuffing box rated to 15 PSI.

• Standard mounting flange is 6″ carbon steel, 316SS optional.

• Optional flanges available in 8″, 10″, 12″ or 14″.

Neptune’s original line of gear-driven mixers for mixing heavy fluids and slurries or large batches of thin liquids.

heavydutyportableseriesd

model d-3.1 and d-4.0

Features

• Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available.

• Universal indexing clamp allows most efficient mixer positioning.

• Fixed cup plate mount optional.

• Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.

• 316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon® also available.

• No clutches to slip, wear or replace.

• Vibration-absorbing pad standard.

• Gears run in grease, giving quiet operation.

• Bearings are permanently lubricated for quiet operation and extended life.

• Cast aluminum housing.

This mixer was engineered to meet the need for a large direct drive mixer with a housing that cannot leak oil.

seriesjd

Features

model d-3.1 and d-4.0

• Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.

• 316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon® also available.

• JD mixers have adjustable angles of entry by indexed ball-and-socket design to achieve different process results.
• Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available.

• Vibration-absorbing pad standard.

• All JD mixer shaft bearings are permanently lubricated.

• Variable speed drives also available.

• Cast aluminum housing.

• Fixed cup plate mount optional.

Neptune’s original line of large, direct drive, portable mixers for mixing larger batches of light and medium solutions or small batches of heavy fluids.

seriesc

model c-1.6 and c-1.2

Features

• Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available.

• Universal indexing clamp allows most efficient mixer positioning.

• Fixed cup plate mount optional.

• Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.

• 316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or TeflonåØ·åØ· also available.
• Vibration-absorbing pad standard.

• Cast aluminum housing.

• Gears run in grease, giving quiet operation.

• Bearings run in grease for quiet operation and extended life.

• Variable speed drives also available.

specialtymixers

pail mixerPail Mixer – Pipe Clamp

Ideal for mixing materials in 5-gallon containers and other open containers. Mixer clamps to a vertical 1-1/2″ in. pipe which allows it to be lowered into container and raised to change containers.

Features

• Air control valve for
speed adjustment.

• Folding propeller
optional.

 

 

Pail Mixer – Rim Clamp

Convenient mixer for mixing materials in 5-gallon closed pails. The handle/motor assembly adjusts along the center line of the pail to align with the opening in pail lid.

pail mixer rim clampFeatures

• Air control valve for speed adjustment on air motor model.

• Toggle switch on electric motor model.

Handle Bar or Pistol Grip Air Mixer

Popular for mixing liquids in containers up to 55 gallons. Can also be used to mix mortar, drywall compound and similar materials in 5-gallon containers.

handle bar or pistol grip air mixer

Features

• Air control valve for speed adjustment.

• Optional “Deadman” trigger on right handle for safety.

• Folding propeller optional.

 

 

flange mount mixer and hand held bung entering mixer

Flange-Mount Mixer

Mounts to container lids.

Hand-Held Bung Entering Mixer

Available with air motor only.