#
Call: 704-786-1700

logo

Flow Line Options Corp. (FLO-Corp) is a global leader in the design, development and manufacture of advanced flow, level and display instrumentation. With decades of experience, FLO-Corp specializes in providing complete, customized measurement solutions to support even the most difficult applications

Flow Line Options Corp. (FLO-Corp) has manufactured and designed flow, level and display systems since 1988 with one simple concept in mind; provide a measuring system that will have unsurpassed value for our customers. FLO-Corp has decades of experience in flow, level, display, tank level measurement, gas detection, pH, pressure, temperature, and electrical instrumentation. This experience encompasses both the design and manufacturing aspects of instrumentation as well as sales engineering and field support. We pride ourselves in both the ability to find the proper system for your application, and the ability to support it. Starting with the purpose of supplying instrumentation to municipal, electrical and industrial markets which include the Steel, Automotive, Petro-Chemical, Food, Consumer Health Care, Municipal, Regulated and Non-Regulated Utilities industries.

FLOW:

MEMFlo – Direct-Reading Industrial Flow Meters for Liquids, Gas & Steam

All MEMFlo meters offer:

  • Easy installation
  • Good accuracy & readability
  • Low maintenance

MEMFlo flow meters simple design provides an accurate meter for just about any liquid, gas or steam application. The MEMFlo meter is a volumetric meter that does not require any straight runs of pipe and is built to last for decades. In use for over 30 years, the MEMFlo meter has now been upgraded with a wide range of electronic options.

MFT™ – Two-Wire Flow Transmitter

mft

The MEMFlo Flow Transmitter (MFT) is a state-of-the-art, microprocessor based two-wire transmitter with 4-20mA/ 0-5Vdc output, digital flow rate and total flow display. It combines our time-proven variable area technology with a high tech processor and solid state circuitry.

  • Pipe Sizes: 1/2″ – 4″
  • Flow Capacities: 1.64 thru 500 GPM liquids, 14.0 thru 5750 SCFM gases. On RangeMaster, most models over 150 SCFH.
  • Max. Service Conditions: Per flow meter model
SupraFlo™ – MFTV Metal Bodied Flow Meters with Clear Top

mftv

Our most widely used flow meter for general purpose industrial flow meters. Rugged design, many options, quick deliveries. Suitable for water and dirty water, coolants, compressed gases, etc.

  • Pipe Sizes: 1/2″ – 2″
  • Flow Capacities: 0.54 thru 120 GPM liquids, 3.20 thru 1000 SCFM gases.
  • Max. Service Conditions: Varies by model; up to 440 psig @ 70°F; up to 400°F at reduced pressure.
SupraFlo™ – MFAM All Metal Flow Meters

mfam

Heavy duty industrial flow meters for high pressure, high temperature service, opaque fluids, and harsh environments. Suitable for most liquids & gases.

  • Pipe Sizes: 1/2″ – 2″
  • Flow Capacities: 0.80 thru 120 GPM liquids, 10.2 thru 1000 SCFM gases.
  • Max. Service Conditions: Varies by model; up to 1000 psig @ 70°F; up to 600°F at reduced pressure.
SupraFlo™ – MFVC PVC & CPVC Corrosive Resistant Flow Meters

mfvc pvc

All wetted PVC or CPVC construction for highly corrosive and high purity fluids. Ideal for water treatment, electrogalvanizing & pickling lines, & deionized water.

  • Pipe Sizes: 1/2″ – 4″
  • Flow Capacities: 0.54 thru 500 GPM liquids, 3.20 thru 5750 SCFM gases.
  • Max. Service Conditions: With socket connections, 265 to 300 psig @ 70°F depending on meter size. At 30 psig 210°F for CPVC models, 140°F for PVC units.
SupraFlo™ – MFP72 P-72 Copolymer Flow Meters

mfp72

All wetted P-72 copolymer construction is ideal for caustic & wet chlorine applications. Most models can be supplied with our alarm and MFT electronics, as well as other MEMFlo options & accessories

  • Pipe Sizes: 1/2″ – 4″
  • Flow Capacities: 0.54 thru 500 GPM liquids, 3.20 thru 5750 SCFM gases
  • Max. Service Conditions: 150 psig @ 70°F for standard flanged connections. Higher pressures possible for other, custom connections. At 30 psig 210°F.
SupraFlo™ – MFTF Metal Bodied Flow Meters

mftf

Same basic capabilities as MFTV & MFAM flow meters in larger flows & pipe sizes. Available in brass, steel, or T-316 stainless steel with polysulfone or metal sight tubes.

  • Pipe Sizes: 2″ – 4″
  • Flow Capacities: 70 thru 500 GPM liquids, 750 thru 5750 SCFM gases.
  • Max. Service Conditions: All metal versions, 500 psig in steel or stainless, 300 psig brass. At 500 psig, 500° for steel or stainless meters. Brass models rated to 350° at 150 psig.
RangeMaster™ – MFRM Low Pressure Gas Flow Meters

mfrm

Designed specifically for low pressure, low density gas measurement. Steel or stainless construction. Average Pressure Drop is 2-1/2″ water column. Accurate measurement of combustion fluids on burners, annealing atmospheres, vacuum flows, & methane from land fills & digesters.

  • Pipe Sizes: 3/4″ – 4″
  • Flow Capacities: 20 thru 30,000 SCFH standard.
  • Max. Service Conditions: All standard models rated to 150 psig. Higher ratings can be provided. To 300°F for polysulfone tube models, to 600°F for stainless models.
SupraFlo™ – MFHF High Pressure Flow Meters

mfhf

These heavy duty industrial flow meters for high pressure, high temperature service, opaque fluids, and harsh environments. Suitable for most liquids & gases.

  • Pipe Sizes: 1/2″ – 1″
  • Flow Capacities: 1.20 thru 23 GPM liquids, 14 thru 260 SCFM gases.
  • Max. Service Conditions: Up to 5000 psig @ 70°F depending on the model; up to 600°F at reduced pressure.
SteamFlo™ – MFSF Industrial Steam Flow Meters

mfsf

These heavy duty industrial flow meters are specifically designed for steam service, including saturated steam. They include special modifications for high temperatures and the harsh conditions steam metering entail.

  • Pipe Sizes: 1/2″ – 4″
  • Flow Capacities: Air equivalent of 10.2 thru 5750 SCFM gases (please see our Steam Sizing calculator to convert).
  • Max. Service Conditions: Varies by model; up to 1000 psig @ 70°F; up to 600°F at reduced pressure.
PDFlo Positive Displacement Flow Meters for Industrial Service

PDFlo positive displacement flow meters are affordable and accurate. One primary feature is their ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter’s solid construction and excellent dynamic response are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, Skydrol as well as other nonabrasive lubricating fluids.

GearFlo Flow Meters

GearFlo™ PDSG1 Positive Displacement Spur Gear Flow Meters

gearflo pdsg1

Description

Specification

A positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology.

Materials of Construction: Aluminum or stainless steel bodies; gears are stainless steel
Accuracy: +/-0.5% with over 10:1 turndown with 30cP fluid
Repeatability: +/-0.1%
Max Fluid Temperature: Meter 185°F Aluminum Body, Meter 400°F Stainless Body

GearFlo™ PDHG Positive Displacement Helical Gear Flow Meters

gearflo pdhg

Description

Specification

The GearFlo™ Helical Gear Flow Meter is constructed of two highly accurate cycloid shaped screw spindles that mesh and rotate inside the cylindrical housing with two overlapping holes in the form of a figure 8, forming the measuring chamber. Its lower pressure drop makes this meter perfect for measuring polyurethanes and polymer, glues and sealing materials and heavy fuel oils.

Materials of Construction: stainless steel
Accuracy: +/-0.5%
Repeatability: +/-0.1%
Max Fluid Temperature: 300°F (higher temperature options available upon request)

GearFlo™ PDTX4 Four-Wire Meter Mounted Flow Transmitter

gearflo pdtx4

Description

Specification

The GearFlo™ PDTX4 is a four-wire, meter mounted digital flow transmitter that is compatible with most PDFlo flow meters. The PDTX4 is housed in a Class I Hazardous Location rated enclosure and features HART communication protocol. A large, back-lighted LCD graphic display provides an easy to read indication of flow rate or total in user programmable engineering units. To change any key functions, simply use the magnet that is attached. No opening of the enclosure is required. To prevent the magnet from entering the programming mode inadvertently, an on board jumper controls ability to allow programming via external magnet. An isolated input also allows for remote rest of the totalizer. A 4-20 mA rate output with user programmable filtering and scaling is also provided for remote indication.

Power Requirement: 15-24 VDC/150mA (customer supplied)
Sensor/Monitor Frequency Range: 0-4000 Hz
Analog Output: 4-20 mA
Enclosure Certifications: Class I, Groups B,C,D; Class II, Groups E,F,G; Class III; Atex: EEx d IIC, IP68; NEMA 4X, 7BCD, 9EFG

GearFlo™ PDTX3 Three-Wire Meter Mounted Flow Transmitter

gearflo pdtx3

Description

Specification

The GearFlo™ PDTX3 is a three-wire, meter mounted flow transmitter that is well-suited for a variety of remote monitoring applications. Microprocessor based, the PDTX3 delivers a fast and linear response. The operational frequency range is user defined and accepts frequencies up to 5,000 Hz. Output signals are available in six types to meet preferred voltage, mA and zero offset choices.

Supply Voltage: 110-30 VDC
Input: 0.25 Hz to 5 KHz
Output: 0-20 mA, 0-5 V, 0-10 V, 4-20mA, 1-5 V, 2-10 V
Enclosure Approvals: NEC Class I Groups C, D; Class II Groups E, F, G; UL Std. 886-CSA Std. C22.2 No. 30

GearFlo™ PDTX2 Two-Wire Meter Mounted Flow Transmitter

gearflo pdtx2

Description

Specification

The GearFlo™ PDTX2 is a two-wire, meter mounted flow transmitter that is compatible with most PDFlo flow meters. The PDTX2 is used in a wide variety of applications where ease of operation and flexibility are required. A NEMA 4X enclosure houses a large 6-digit LCD display screen where either flow rate or total is continuously displayed in the customers selected and programmed engineering units. The selection of rate, total, reset of the total, programmable sleep mode and the real-time clock can be done via magnet-without opening the enclosure. A long life field replaceable battery provides power for a period of 4 years – depending on the units configuration.

Power: Internal 3.6V “C” Cell Battery
Sensor/Transmitter Frequency Range: 0-3,000 Hz Max
Output Options: 4-20 mA, loop powered; Pulse output scaleable to 100 Hz
Enclosure Certifications: Class I, Groups B, C, D; Class II, Groups E, F, G; Class II ATEX: EExd IIC, IP68, NEMA 4X, FM Class No. 3615, CSA Class 1, Div 1Certification Pending

GearFlo™ Spur Gear Sensors PDSR1/PDSR2

gearflo spur gear 1gearflo spur gear 2

gearflo spur gear 3

Description

Specification

The GearFlo™ PDSR1 is a single hall effect sensor that is compatible with PDFlo GearFlo Positive Displacement Flow Meters. This sensor detects the rotation of the flow meter’s gears and emits a frequency signal proportional to flow. The GearFlo PDSR2 is a dual hall effect sensor that is compatible with GearFlo Positive Displacement Spur Gear flow meters. This microprocessor-based sensor can detect both uni- and bi-directional flow. The sensors’ mode of operation is determined by an output selection switch located inside the housing.

PDSR1 & PDSR2 Models

Supply Voltage: PDSR1: +10 to 28 VDC; PDSR2: +10 to 27 VDC
Minimum Signal: 0.5 Hz
Driving Capacity: 50mA Max resistance load
Temperature Range: -40ºF to 185ºF (-40º to 85ºC)

GearFlo™ Helical Gear Sensors PDSR1/PDSR3

gearflo helical 1 gearflo helical 2 gearflo helical 3

Description

Specification

The GearFlo™ PDSR1 is a single hall effect sensor that is compatible with PDFlo GearFlo Positive Displacement Flow Meters. This sensor detects the rotation of the flow meter’s gears and emits a frequency signal proportional to flow. The GearFlo PDSR3 is a carrier-frequency pulse amplifier that can be paired with GearFlo Positive Displacement Helical Gear Flow Meters. The integral carrier-frequency pickup of the PDSR3 detects the r.p.m. of the flow meter.

PDSR1 Model
Supply Voltage: PDSR1: +10 to 28 VDC
Classification: General Purpose: PDSR1-__-GP; Explosion Proof: PDSR1-__-XP

PDSR3 Model
Supply Voltage, UB: +8.5 to 29 VDC, controlled
Classification: General Purpose: PDSR3-__-GP; Intrinsically Safe: PDSR3-__-IS (Ex II2 G EEx ia IIC T4)

UltraFlo Ultrasonic Flow Meters

FLO-CORP offers both UltraFlo transit time meters for clean liquids, and doppler units for liquids with suspended solids. A clamp-on model with integral display is also now offered. Ultrasonic transit time flow meters feature the world’s most advanced non-invasive flow measurement technology available, providing a measuring system with unsurpassed accuracy, versatility, low-cost of installation and low-cost of ownership. Full-pipe, bi-directional, liquid flows up to 40 FPS can be measured in pipe sizes from 1″ to 100″. Our ultrasonic doppler meters are ideal for sewage, sludge, slurries, and other fluids with suspended solids or high aeration.

SemperSonic™ UFTP Portable Transit Time Flow Meter with Transducers

sempersonic uftp

Description

Specification

The SemperSonic™ UFTP Portable Transit Time Flow Meters are designed for long- or short-term measurement flow surveys on full-pipe liquid systems and are ideal for verifying calibration of permanently mounted flow meters of all types. Although intended primarily for cleaner liquids, the flow meter operates reliably with greater amounts of suspended solids or aeration than previous transit time ultrasonic flow meters were capable of measuring.

Power Requirements: Internal 12 V lead-acid Gel Cell battery provides 24 hrs of continuous operation @ 20°C.
Outputs: Standard 4-20 mA; optional pulse.
Data Logger: 200,000-event, 16-bit, integral DB-9 RS232C connection..
Display: 128 x 64 pixel graphics LCD, LED back lit. Two user selectable font sized 0.35″ [8.9mm] or 0.2″[5.0 mm] 8 digit rate, 8 digit totalizer (resettable)

SemperSonic™ UFTL Compact Transit Time Flow Meter, Integral and Remote Models

sempersoni uftl

Description

Specification

The SemperSonic™ UFTL Compact Transit Time Flow Meters can be configured for integral and remote applications.  This non-contacting unit offers advanced capabilities and provides instantaneous rate and accumulated flows along with 4-20mA and pulse outputs.

Power Requirements: 11-30 VDC @ 0.25A
Outputs: Standard 4-20 mA
Display: Type 2 line x 8 character LCD; top row: 0.7″ [18mm] tall, 7-segment; Bottom row: 0.35″ [9mm] tall, 14-segment none; Rate 8 maximum rate digits, lead zero blanking; Total 8 maximum totalizer digits

SemperSonic™ UFTD Dedicated Transit Time Flow Meter with Transducers

sempersonic uftd

Description

Specification

The SemperSonic™ UFTD Dedicated Transit Time Flow Meters provide a measuring system with unsurpassed accuracy, versatility, low cost of installation and low cost of ownership. This system installs quickly onto liquid piping systems with its non-invasive, non-fouling transducers and can be configured and operational within minutes. UFTD is designed for fixed-location installation on liquid systems.

Power Requirements: (Std) 10-28 VDC @ 0.25 VA max; 115/230 VAC, 50/60 Hz ± 15% @ 5 VA max
Outputs: 4-20 mA, relay or pulse options
Display: 2 line x 8 character, LCD, back lit. Top row: 7-segment digit height, 0.7 inches [18 mm]; Bottom row: 14-segment digit height 0.35 inches [9 mm]; 8 digit rate, 8 digit totalizer (resettable)

ScanSonic™ UFDD Dedicated Digital Doppler Flow Meter with Transducers

 scansonic ufdd

Description

Specification

The ScanSonic™ UFDD Dedicated Digital Doppler Flow Meters measure flow of liquids that contain useful sonic reflectors suspended within the liquid. The UFDD replaces the obsolete velocity sensors by using more advanced technology for easier installation and more reliable readings on a wide range of liquid and reflector conditions. Unlike other Doppler technologies, the UFDD is relatively insensitive to VFDs and other ultrasonic noises.

Power Requirements: 115/230 VAC 50/60 Hz ± 15% @ 5 VA, Max; 12-28 VDC @ 2.5 VA Max.
Outputs: 4-20 mA, dual relay, or pulse options
Display: 2 line x 8 character LCD; LED backlighting; Top row 7-segment 0.7 inch (18 mm); bottom row 14-segment 0.35 inch (9 mm); 8-digit rate 8-digit total (resettable)

MASSFlo Flow Meters

Mass flow meters using both coriolis and thermal mass flow principles are offered and supported by FLO-CORP.

MASSFlo Series Coriolis Mass Flow Meters

 massflo coriolis

Description

Specification

Utilizing the Coriolis principle, our MASSFlo series of mass flow meters are superior process control tools that allow real-time measurement of density and flow in liquids, slurries and gases. The MASSFlo line features excellent accuracy and large turndowns in single or dual tube designs. The meters feature no moving parts and smooth flow tubes of 316 stainless steel resulting in a design that is easy-to-clean and maintain.

Accuracy: ±0.5 % of reading
Input Power: 24VDC
Output: 0/4-20mA or pulse
Enclosure: NEMA 4X; Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; ATEX EEx d IIC, IP68, FM Class No. 3615

ThermoMassFlo™ FCM Thermal Mass Flow Meters

thermomassflo fcm

Description

Specification

A low cost solution to thermal mass flow metering for gases is presented with the FCM flow meter line. The FCM design combines the convenience and accuracy of conventional mass flow devices with low costs previously unattainable. Each of these meters incorporate an advanced straight tube sensor in conjunction with flow passage elements constructed of aluminum and brass for non-corrosive gases or 316 stainless steel for corrosive applications.

Accuracy: ±1.5 % of full scale
Input Power: 12VDC standard, 24VDC optional
Output: 4-20mA or 0-5VDC
Compliance: CE COMPLIANT: EN 55011 class 1, classB; EN50082-1

WaterFlo Meters

FLO-CORP WaterFlo totalizing meters are designed for residential and commercial applications. If you are looking for a high quality, low cost, extremely accurate water meter for commercial or residential purposes, we have the right meter for your needs.

Residential & Commercial Water Meters

waterflo

Description

Specification

FLO-CORP’s proven JL & JLR residential or commercial series meters offer a self-powered generator combined with a rugged, compact and accurate remote counter. The result is one of the most accurate, compact and reliable outside visual readout (OVR) systems on the market. For greater convenience and efficiency, we have designed our OVR System so that the remote counter may be installed up to 1000′ from the meter.

Accuracy: ±1.5% of maximum flow when operating between minimum and maximum flow range
Pressure ratings: Do not exceed 150 psig
Register Options: U.S. Gallons, cubic feet, metric
Signal Capability: OVR reader pad may be mounted up to 1000’ from meter.

LowFlo Purge Flow Meters

LowFlo purge meters are designed for monitoring low flow rates.

RotaTek™ LFRT Low Flow Purge Meter

 rotatek lfrt

Description

Specification

Designed for monitoring low flow rates, RotaTek LFRT is a precision instrument embodying the inherent simplicity, versatility and economy of the classical rotameter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow and level indicating, etc.

Materials of Construction: Aluminum or stainless steel bodies; gears are stainless steel
Accuracy: +/-0.5% with over 10:1 turndown with 30cP fluid
Repeatability: +/-0.1%
Max Fluid Temperature: Meter 185°F Aluminum Body, Meter 400°F Stainless Body

ChannelFlo Flow Meters

FLO-CORP offers a variety of systems for effluent flows, gravity fed sewer lines, storm water monitoring, river and stream monitoring, and clarifier effluent.

HydroFlo™ 3000 Data Logger

hydroflo 3000

Description

Specification

The HydroFlo provides remote data logging and telemetry for flumes, weirs, rainfall, water quality, and wet wells. With a fully integrated data logger, solar regulator and battery housed in one rugged weatherproof enclosure, the HydroFlo is built to withstand the harshest of environments, and offers plug ‘n’ play capability with just about any environmental sensor.

Power: Internal 12Volt 7.2Ah battery with external solar panel or main charger
Flow display: 16 character x 2 line alphanumeric LCD with backlight
Program memory: 2 Mb flash
Enclosure rating: IP66

FloPro™ Series 3 Flow Transmitter and Logger

flopro series 3

Description

Specification

The FloPro Series 3 Flow Transmitter and Logger features field proven Doppler velocity and level measurement sensors. Advanced spectrum signal processing allows the FloPro velocity sensors to produce superior results under a wide range of hydraulic operating conditions. With the new Series 3 FloPro, up to five Doppler flow sensors can be monitored by the same instrument, making flow measurements even more flexible and affordable.

Power: Internal 12Volt 7.2Ah battery with external solar panel or main charger
Flow display: 16 character x 2 line alphanumeric LCD
Program memory: 2 Mb flash
Enclosure rating: IP66

HVFlo™ Series 2 Portable Waterproof Logger Flow Meter

 hvflo series 2

Description

Specification

HVFlo is a high performance battery operated open channel flow monitoring solution for wastewater, storm water and industrial discharge applications. This device features field proven Doppler velocity and level measurement sensors. Advanced spectrum signal processing allows HVFlo to produce superior results under a very wide range of hydraulic operating conditions. Even under full pipe, surcharge, or reverse flow conditions, HVFlo will produce accurate, repeatable results every time. HVFlo offers optional telemetry interface for long-term monitoring applications.

Weight: 13.2 lbs

Power: Rechargeable battery, 6VDC, 10 Ah sealed lead acid battery
Program memory: Battery backed NVRAM
Enclosure rating: IP68 to 9.8 ft

CalFlo Flow Meters

AirFlo™ CFAF Compact Air Flow Meter

 airflo cfaf

Description

Specification

This industrial purpose flow meter is a great choice for monitoring a diverse range of air or gaseous applications. AirFlo is encapsulated in epoxy resin and operates with NO moving parts. AirFlo provides a wide measurement range up to 164 fps and is available in five different units to ensure the best signal resolution. Typical applications include air conditioning, dust collection systems, ventilation monitoring, and energy conservation systems.

Pressure: CFAF-U: 15 psi (1 bar)
CFAF-S: 150 psi
Accuracy: < 3%
Repeatability: < 1%
Temperature Drift: < 0.3% / K
Supply Voltage: 24 VDC ±30%
Consumption: 1.3W max.
Output: 4-20 mA
Resistive Load: 0-500 Ohm

VFlo™ CFVF Insertion Liquid Flow Meter

vflo cfvf

Description

Specification

This industrial purpose flow meter is a great choice for a variety of measurement and control applications. Completely encapsulated in epoxy resin, the VFlo features solid-state sensing with proven reliability and long-term stability, even under the harshest environmental conditions. VFlo has an adjustable measuring range, LED indication of flow, and is well-suited for pipes up to 16″ in diameter. Typical applications include potable water, non-potable water, deionized water, sulfuric acid, light oil, and diluted corrosive liquids.

Pressure: 435 psi (30 bar)
Accuracy: < 3%
Repeatability: < 1%
Temperature Drift: < 0.3% / K
Supply Voltage: 24 VDC ± 10%
Consumption: 1.3W max.
Output: 4-20 mA
Resistive Load: 0-600 Ohm

VFlo Plus™ CFVF2 Variable Depth Liquid Flow Meter

 vflo plus cfvf2

Description

Specification

This industrial purpose flow meter is a great choice for a wide range of liquid applications. The VFlo Plus provides high accuracy measurement of flow, including very low flow rates, using a solid state design with NO moving parts. VFlo Plus features an adjustable measuring range, easily adjusts to variable insertion depths, and fit pipes up to 24″ in diameter. Typical applications include potable water, non-potable water, deionized water, sulfuric acid, light oil, and diluted corrosive liquids.

Pressure: 261 psi (18 bar)
Accuracy: < 3%
Repeatability: < 1% / Response time to flow rate change 10 sec. typ.
Supply Voltage: 24 VDC ± 10%
Consumption: Approx. 100-200 mA
Output: 4-20 mA
Resistive Load: 0-600 Ohm

AeroMeter™ CFAM Inline Air Flow Meter

aerometer cfam

Description

Specification

Ideal for small pipe and low flow applications, AeroMeter is a compact inline flow meter that will accurately measure and control a variety of gaseous media. Completely encapsulated in epoxy resin, AeroMeter features solid-state sensing, adjustable measuring range, LED output display and is well-suited for small pipes up to 3/4″ in diameter. Typical applications include vent gas, wet stack gas, sample line flow, purge flow, nitrogen blanket flow and many others.

Pressure: 140 psi (10 bar)
Accuracy: < 3%
Repeatability: < 1%
Supply Voltage: 24 VDC ± 15%
Consumption: Approx. 800 mW to 1.3 W
Output: 4-20 mA

HydroMeter™ CFHM Inline Liquid Flow Meter

hydrometer cfhm

Description

Specification

Ideal for monitoring low flow rates, HydroMeter is a self-contained, inline flow meter that is ideal for measurement and control applications. HydroMeter is field adjustable and provides a 4-20 mA output for flow rate. The hollow stainless steel tube acts as the sensing device and provides intrusion-free flow monitoring. Typical applications include chemical dosing, oil lubrication monitoring, food and beverage processing, light to medium viscosity fluids and a variety of other industrial applications.

Pressure: 435 psi (30 bar)
Service: Compatible Liquids
Repeatability: < 2% full scale
Supply Voltage: 24 VDC ± 10%
Consumption: 100 mA maximum
Output: 4-20 mA

MEMFlo Alarms and Flow Switches

FLO-CORP provides a variety of flow alarms and adjustable switches for a wide array of industrial applications.

FloSentry II™ MFFS2  Single Alarm System

flosentry II mffs2

Description

Specification

Compatible with most MEMFlo meters, FloSentry II is a great choice for a variety of single alarm applications. FloSentry II provides a high or low level switch with a single sensor input. This alarm system can be added to most flow devices to provide intelligent process automation as well as, safety capabilities. The optional strobe light brings immediate attention to process conditions. Typical applications include process gas flows, biodiesel fuel manufacturing, chemical processing, biomedical, coolant system, water and wastewater treatment facilities.

Service: Compatible gasses or liquids
Supply Voltage: 120/240 VAC @ 50-60 Hz
Enclosure Rating: NEMA 4 (IP65)

FloSentinel™ MFFL Adjustable Flow Switch for Liquids or Gases

flosentinel mffl

Description

Specification

The FloSentinel™ is an adjustable flow switch for liquids or gases. It features low pressure drop, and has no springs, cams, vanes or mechanical linkages. It is ideal for safety showers, pressure sprayers, lubricating systems, gas leak detection, purge flows, seal water and many other demanding applications.

Maximum Electrical Ratings: AC version — Maximum 1 amp resistive @ 120 VAC. DC version — 10W @ 100 VDC.
Repeatability: ±1%
Construction: Models of all-wetted brass, T-316 stainless steel, PVC, or CPVC.
Connections: 3/4″ and 1-1/2″ NPT standard.

Flow Switches for Liquid & Gas Service

FLO-CORP provides a variety of flow alarms and switches for a wide array of liquid and gas applications.

SwitchGuard™ CFSG Flow & Temperature Switch

switchguard cfsg

Description

Specification

Offered in general purpose and hazardous proof configurations, this compact flow switch is a great choice for monitoring a diverse range of liquid applications. SwitchGuard will monitor flow and temperature to protect equipment and process from high temperatures and no-flow conditions. SwitchGuard has NO moving parts and is a reliable alternative to failure prone mechanical flow switches. The short sensor is intended for use in pipe sizes 1/2″ to 1½” in diameter and the long sensor is recommended for pipe sizes 2″ and up.

Service: Compatible Liquids
Flow Set Point: 1.2 fps (.4 mps) (water related)
Response Time: < 30 seconds
Sensor Rating: CFSG-1: NEMA 6 (IP67)
CFSG-2: NEMA 7

SwitchGuard Plus™ CFSG2 Flow & Temperature Switch w/ Compact Relay Controller

switchguard plus cfsg2

Description

Specification

This general purpose liquid switch package provides a complete solution for low flow pump or process protection with a 16A compact relay controller. The optional strobe light brings immediate attention to low flow conditions. The short sensor is intended for use in pipe sizes 1/2″ to 1½” in diameter and the long sensor is recommended for pipe sizes 2″ and up. The products is broadly selected for low or no-flow applications.

Set point: 1.2 fps (.4 mps) (water related)
Response Time: < 30 seconds
Supply voltage: 120/240 VAC @ 50-60 Hz
Sensor Rating: NEMA 6 (IP67)

FloGuard™ CFFG Adjustable Flow Switch

floguard cffg

Description

Specification

Offered in both short and long sensor lengths, this innovative flow switch is a great choice for monitoring a variety of liquid applications. FloGuard sets your present flow-rate at 100% at power up. Relative flow rate is indicated by the 7 LED lights. When the flow rate drops to 50% an alarm goes off. If you prefer, you can adjust the alarm point to fit your needs. A green output indicating LED is also included. The short sensor is indicated for use in pipe sizes ranging from 1/2″ to 1½” in diameter and the long sensor is recommended for pipe sizes 2″ and up.

Set point: Pre-set to 50% (field adjustable)
Response Time: ± 25 seconds
Supply voltage: 20-30 VDC (short circuit protected)
Range: 0 to 5 fps (0 to 1.5 mps)

NitroFlo™ CFNF Compact Air Flow Switch

 nitroflo cfnf

Description

Specification

This industrial purpose flow switch is a great choice for monitoring a diverse range of air or gaseous applications. NitroFlo is encapsulated in epoxy resin and operates with NO moving parts. NitroFlo has adjustable span potentiometers, and adjustable set point from 1.5 to 65 feet per second, and LED indication of flow. Typical applications include air conditioning, dust collection systems, ventilation monitoring and energy conservation systems.

Pressure: CFNF-U: 15 psi (1 bar)
CFNF-S: 150 psi (10 bar)
Accuracy: < 3%
Hysteresis: < 20%
Supply Voltage: 24 VDC ± 30 %

 

NitroFlo™ CFNF1 AC Air Flow Switch

nitroflo cfnf1

Description

Specification

This industrial purpose flow switch is a great choice for monitoring a variety of air or gaseous applications. NitroFlo features solid-state switching and is extremely reliable even under the harshest environmental conditions. NitroFlo features a repeatable alarm, an adjustable set-point from 3 to 32 feet per second, and LED indication of flow. The short housing intended for use in pipe sizes 1/2″ to 1½” in diameter and the long housing is recommended for pipe sizes 2″ and up. Typical applications included air conditioning, ventilation, air filter monitoring, extraction fans, blowers, damper regulators and energy conservation systems.

Pressure: CFNF1-_-U: 15 psi (1 bar)
CFNF1-_-S: 150 psi (10 bar)
Switching Range: 3 to 32 fps (1 to 10 mps)
Voltage Tolerance: ± 10 %
Switching Current: 200 mA max.


NitroFlo™ CFNF2 DC Air Flow Switch

nitroflo cfnf1

Description

Specification

This industrial purpose flow switch is a great choice for monitoring a variety of air or gaseous applications. NitroFlo features solid-state switching and is extremely reliable even under the harshest environmental conditions. NitroFlo features a repeatable alarm, an adjustable set-point from 3 to 32 feet per second, and LED indication of flow. The short housing intended for use in pipe sizes 1/2″ to 1½” in diameter and the long housing is recommended for pipe sizes 2″ and up. Typical applications included air conditioning, ventilation, air filter monitoring, extraction fans, blowers, damper regulators and energy conservation systems.

Pressure: CFNF2-U: 15 psi (1 bar)
CFNF2-S: 150 psi (10 bar)
Switching Range: 3 to 32 fps (1 to 10 mps)
Temperature Drift: <0.5% / K
Switching Current: 500 mA max.

AeroSwitch™ CFAS Inline Air Flow Switch

 aeroswitch cfas

Description

Specification

Ideal for small pipe and low flow applications, AeroSwitch is a compact inline air flow switch that will accurately monitor a variety of gaseous media. Completely encapsulated in epoxy resin, AeroSwitch features a broad measuring range, LED output display and is well-suited for small pipes up to 3/4″ in diameter. Typical applications include vent gas, wet stack gas, sample line flow, purge flow, nitrogen blanket flow and many others.

Pressure: 140 psi (10 bar)
Repeatability: < 1%
Temperature Drift: <0.3% / K
Measuring Range: 1.5-65 fps (0.5-20 mps)

Flow Monitors for Totalizing, Remote Monitoring and Data Logging

DigaCom™ 2000 DCX2 Universal Process Display

 digacom 2000  dcx2

Description

Specification

DigaCom 2000 Universal Process Display is a field mount display that provides bright, 6-digit LED indication, internal DC power supply for transmitter power, 4-20 mA repeat output and advanced communications. DigaCom features digital push button configuration, simple programming interface, and Ethernet communication. This device is well suited for a variety of process applications. Configure Device, Remotely Monitor, Data Log and Much More with DigaLink™ Interactive Software.

Display: 6-digit, Red LED
Analog Input: 4-20 mA current loop
Analog Output: Isolated 4-20 mA current loop
Enclosure Rating: NEMA 4X (IP65) or NEMA 7
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

DigaTouch™ DTX1 Advanced Universal Process Display

digatouch dtx1

Description

Specification

DigaTouch Advanced Universal Process Display is a panel or field mount process display that provides bright, 6-digit LED indication, internal DC power supply for transmitter power, and advanced communications. DigaTouch features universal I/O, touch screen interface, dual AC/DC power supply, password protection, and Ethernet communication. This device is well suited for a variety of flow remote monitoring for MEMFlo, PDFlo, TurboFlo, and Open Channel Flow Meters. Configure Device, Remotely Monitor, Data Log and Much More with DigaLink™ Interactive Software.

Display: 6-digit, Red LED
Analog Input: 4-20 mA current loop, 0-5 VDC, 1-5 VDC, 0-10 VDC
Enclosure Rating: NEMA 4X (IP65)
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

eXmod™ DXM1 Relay Expansion Module

 exmod dxm1

Description

Specification

The eXmod™ is a 4-relay output module that connects to select Universal Process Displays via RS-485 serial communication (4-wire). The eXmod is extremely versatile and can be mounted locally or remotely to allow for a purely distributed system. Display(s) can be mounted in the plant or control panel, while the eXmod can be mounted in the motor control cabinet for reduced cost of control wiring. Additionally, the eXmod’s BIG 10 AMP AC/DC rated replays bring added value to your control/alarm monitoring systems.

Status Indicators: (4) Red LED Relay Indicators
Supply Voltage: 12-24 VDC
Enclosure Rating: NEMA 4X (IP65)
Classification: General Purpose

DigaLink™ 2.0 Configuration & Remote Monitoring Software

 digalink 2.0

Description

Specification

DigaLink™ 2.0 is an interactive software, enabling users to configure and remotely monitor DigaCom & DigaTouch displays from the convenience of  their PC. DigaLink is unique in it’s communication protocol that utilizes both TCP/IP Ethernet communication and Modbus/RS485 serial communication simultaneously. This advanced software features display configuration, datalogging and real-time monitoring of unlimited devices. With DigaLink you can easily setup and monitor the device from practically anywhere.

Operating System: Windows®XP through Windows 7
Unique Feature: Simple device configuration
Communication: Ethernet TCP/IP Communication, Modbus®, RS485 Serial Communication
Data Logging: Historical Trending, Export to Excel, Adjustable time sample

 LEVEL:

Ultrasonic and Radar Level Transmitters

Tracer 1000™ Radar Level Transmitter for Liquids

tracer 1000

Description

Specification

Featuring TDR (Time Domain Reflectometry) technology, the Tracer 1000™ provides continuous radar level measurement and point level detection in liquids, with analog and switching output. This innovative radar device has almost no installation restrictions – the 1″ radar beam can be mounted in small tanks, tall and narrow nozzles and it measures precisely even with difficult tank geometries or close to interfering structures. Factory settings may be configured via HART® Communication protocol. Tracer 1000 is ideal for various types of processing and storage applications and has an exceptional performance in liquids even with low reflectivity such as light oils and hydrocarbons.

Range: 1.5″ – 780″
Measurement: Liquids
Accuracy: ± 0.12″
Process Mount: 3/4″ NPT (3/4″ G)
Certification:

• Standard: NEMA 6 (IP66/ IP68) General Purpose

• Optional: ATEX, Explosion Proof, Zone 1

Tracer 2000™ Radar Level Transmitter for Solids

tracer 2000

Description

Specification

Featuring TDR (Time Domain Reflectometry) technology, the Tracer 2000™ provides continuous radar level measurement and point level detection in solids, with analog and switching output. This innovative device has almost no installation restrictions – it can be mounted in large tanks, tall and narrow nozzles and it measures precisely, even with difficult tank geometries or close to interfering structures. Factory settings may be configured via HART® Communication protocol. Tracer 2000 is ideal for various types of processing storage applications.

Range: 1.5″ – 780″
Measurement: Solids
Accuracy: ± 0.12″
Process Mount: 1″ NPT (1″ G)
Certification:

• Standard: NEMA 6 (IP66/IP68) General Purpose

• Optional: ATEX, Explosion Proof, Zone 1

EchoPod™ DL10 1.25m Ultrasonic Level Transmitter

 echopod dl10

Description

Specification

EchoPod is a general purpose, ultrasonic sensor that provides non-contact level measurement up to 49.2″ (1.25m) with a 4-20mA output. EchoPod directly replaces contact measurement sensors connected to a PLC analog input card for easy design conversion or field retrofit.

Range: 2″ to 49.2″ (1.25m)
Signal output: 4-20mA, two-wire
Enclosure Rating: Type 6P
Process mount: 1″ NPT (1″ G)

EchoPod™ DL14 Level Transmitter, Switch & Controller

 echopod dl14

Description

Specification

EchoPod is a general purpose non-contact ultrasonic level switch, controller and transmitter for small tanks 49.2″ (1.25 m) or less. It is well suited for corrosive and dirty applications with its non-metallic housing and transducer.

Range: 49.2″ (1.25m)
Signal output: 4-20mA, two-wire (when loop powered)
4 Relays: programmable for switch or advanced pump or valve control and fail-safety
Enclosure Rating: Type 6P, encapsulated, corrosion resistant & submersable
Process mount: 1″ NPT (1″ G)

EchoPod Plus™ DL24 Level Transmitter, Switch & Controller

 echopod plus dl24

Description

Specification

EchoPod Plus is a general purpose non-contact ultrasonic level switch, controller and transmitter for tanks or vessels 9 feet or less. Maintenance free, the EchoPod reduces tank system hardware through simplicity and consolidation. It is well suited for corrosive and dirty applications with its non-metallic housing and transducer.

Range: 98.4″ (2.5m)
Signal output: 4-20mA, two-wire (when loop powered)
4 Relays: programmable for switch or advanced pump or valve control and fail-safety
Enclosure Rating: Type 6P, encapsulated, corrosion resistant & submersable
Process mount: 1″ NPT (1″ G)

EchoSafe™ XP88/89 Explosion Proof Ultrasonic Transmitter

echosafe xp88

Description

Specification

EchoSafe is an explosion proof, two-wire ultrasonic transmitter providing non-contact level measurement up to 32.8 feet (10 meters) in hazardous bulk storage, day tank and sump applications, and is well suited for challenging corrosive, slurry or waste media. A narrow, 3″ beam diameter enables flexible installations.

Range: XP88 8″ tp 24.6′ (20 cm to 7.5 m)XP89 8″ to 32.8′ (20 cm to 10 m)
Signal output: 4-20 mA, two-wire
Enclosure Rating: NEMA 4
Approvals: FM: Class 1, Div 1Groups A,B,C,D Class II/III, Div 1, Groups E, F, G
Process mount: 2″ NPT

EchoSpan LU81/83/84 Two-Wire Ultrasonic Level Transmitter

 echospan lu81

Description

Specification

EchoSpan is the advanced non-contact level measurement solution for atmospheric storage tanks up to 32′ (10m) including bulk storage, day tank and waste sump applications. Calibration is fast and simple with our scrolling single layer menu, three button interface and 6-segment LCD display. Its full featured level made simple.

Range: 4″ to 32.8′ (10cm to 10m)
Signal output: 4-20 mA, two-wire
Enclosure rating: IP65
Process mount: 2″ NPT (2″ G)

EchoSonic II™ LU27/28/29 Second Generation Two-Wire Ultrasonic Level Transmitter

echosonic II lu27

Description

Specification

The new EchoSonic II provides non-contact level measurement up to 32.8′ (10 m), and is well suited for challenging ultrapure, corrosive, slurry or waste liquids. Used for atmospheric bulk storage, day tank, waste sump, process vessel, IBC tote, 55-gallon drum and waste sump applications. Media examples include acetic acid and resin.

Range: 4 to 8.2′ (10 cm to 2.5 m), or 8 to 24.6′ (20 cm to 7.5 m), or
8 to 32.8′ (20 cm to 10 m)
Signal output: 4-20 mA, two-wire
Enclosure rating: Type 6P encapsulated, corrosion resistant & submersible
Process mount: 1″ / 2″ NPT (1″ / 2″ G)

EchoTouch™ LU20 Two-Wire Ultrasonic Level Transmitter

 echotouch lu20

Description

Specification

CSA approved intrinsically safe for use in hazardous zones, the non-contact level transmitter is ideal for atmospheric bulk storage, day tank and waste sump applications up to 18′ (5.4m). Compact and rugged, the push button calibrated transmitter is reliable and easy to configure. Its hazardous level made simple.

Range: 6″ to 18′ (15cm to 5.4m)
Signal output: 4-20 mA, two-wire
Enclosure rating: IP65
Process mount: 2″ NPT (2″ G)

EchoTouch™ LU30 Three-Wire Ultrasonic Level Transmitter

 echotouch lu30

Description

Specification

EchoTouch provides non-contact level measurement of atmospheric bulk storage tanks up to 24.5′ (7.4m) with an integral relay for alarm or automatic fill or empty control. Compact and rugged, the push button calibrated transmitter is reliable and easy to configure. Its level measurement and control made simple.

Range: 6″ to 24.5′ (15cm to 7.4m)
Signal output: 4-20 mA, three-wire
Enclosure rating: IP65
Process mount: 2″ NPT (2″ G)

DeltaSpan™ LD30 External Pressure Transmitter

 deltaspan ld30

Description

Specification

The general purpose two-wire pressure transmitter is offered in two termination packages and provides contact level measurement up to 69′ or 21.1m of water column. The transmitter is best applied with clean liquid or gas media including water, oil and air.

Range: 0 psi (0 bar) – 30 psi (2 bar)
Signal output: 4-20 mA, two-wire
Enclosure rating: IP65
Cable length
: 9′ (3 m)

DeltaSpan™ LD31/32 Submersible Pressure Transmitter

deltaspan ld31

Description

Specification

The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46′ or 14m of water column. Select the LD31 for clean or relatively clean water, light weight oils and diluted chemical media. Application examples include ground water, ponds and wells. Select the LD32 for dirty, sludge or slurry media. Application examples include sewer or storm pump lift stations, storage and treatment with surface foam or debris where ultrasonic cannot be applied.

Range: 0 psi (0 bar) – 20 psi (1.38 bar)
Signal output: 4-20 mA, two-wire
Enclosure rating: IP67
Cable length
: 40′ (12.2 m) or 60′ (18.3 m)

FloaTek™ LV55 Two-Wire Float Level Transmitter

 floatek lv55

Description

Specification

The general purpose two-wire float transmitter provides contact level measurement up to 8′ or 2.4m, and is ideally suited for relatively clean water, light oil or diluted corrosive liquids. The transmitter is typically selected for high temperature and/or pressure process tank applications. Media examples include boiler water and cooking oil.

Range: 6″ to 96″
Signal output: 4-20 mA, two-wire
Enclosure rating: NEMA 4X (IP65)
Process Mount
: 2″ NPT

Ultrasonic and Vibrating Level Switches

Vibex™ LSV1 Vibrating Level Switch

 vibex lsv1

Description

Specification

The Vibex™ universal vibrating level switch is an ideal solution for point level detection in liquids. Using vibrating fork technology, this device will detect the change in its natural resonant frequency depending on the liquid coverage of the vibrating fork. If the vibrating fork is covered by liquid, its natural resonant frequency changes, which is detected by the sensor and converted into a switching output signal. If the vibrating fork is not covered by liquid, its natural resonant frequency changes back and so does the state of the switching output.

Switching Output: Transistor
Supply Voltage: 10 to 55 VDC
Hysteresis: 0.08in (2mm)
Connection Size: 3/4″ or 1″ (NPT or G)

EchoSwitch II, LU77/78 Second Generation Non-Contact Level Switch and Controller

 echswitch II lu77

Description

Specification

The EchoSwitch II ultrasonic switch and controller provides non-contact level detection up to 24.6′ (7.5 m) with 3 SPDT 60 VA 1A relays. EchoSwitch II features digital push button configuration, eliminating target calibration.

Range: 4 to 8.2′ (10 cm to 2.5m) &
8 to 24.6′ (20 cm to 7.5m)
Switch Points: 6 (field adjustable)
Contact Type: (3) SPDT relays
Process mount: 1″ / 2″ NPT (1″ / 2″ G)

Smart Trak LM10 Multi-Point Fitting

 smarttrak lm10

Description

Specification

Smart Trak provides intrinsically safe multi-point level detection with one to four adjustable switch points. Offered in three sensor technologies, Smart Trak is selected for day tank, waste sump and process vessel applications. Its hazardous level detection made simple.

Length: 8″ to 10′ (20cm to 3m)
Switch Points: 1-4 (field adjustable)
Contact Type: SPST relay(s)
Process mount: 2″ NPT (2″ G)

Switch-Tek LU10 Ultrasonic Level Switch

 switch tek lu10

Description

Specification

The intrinsically safe ultrasonic switch is the ultimate high or low level switch for a wide range of liquids including chemical, solvent and petroleum media. Both the submersible probe and cable are constructed of rugged PP or PFA Teflon® for maximum corrosion resistance.

Installation: Universal
Contact type: (1) SPST relay
Sensor material: PP / PFA
Process mount: 3/4″ NPT (3/4″ G)

 

Switch-Tek LZ12 Vibration Level Switch

switch tek lz12

Description

Specification

The general purpose vibration switch is the choice for wastewater applications including those with light to medium coating, scaling or foaming media. Universally mounted, the sensor automatically adjusts for coating build up and outputs a preventative maintenance alarm.

Installation: Universal
Contact type: (1) SPST relay
Sensor material: Ryton®
Process mount: 3/4″ NPT (3/4″ G)

Switch-Tek™ LV3 / LVH High-Temp Float Level Switch

switch tek lv3

Description

Specification

The general purpose vertical or horizontal high-temp float level switches are offered in 316 stainless with a dry contact closure for PLC, SCADA or alarm interface. The level switches are selected for high temperature or pressure applications with clean water or diluted chemical solutions.

Installation: Vertical / horizontal
Contact type: (1) SPST reed
Sensor material: 316 ss
Process mount: 1/8″ NPT / 1/4″ NPT / 1/2″ NPT

Switch-Tek LV10 Vertical Buoyancy Level Switch

switch tek lv10

Description

Specification

The general purpose vertical buoyancy level switch is offered in PP or PVDF with a dry contact closure for PLC, SCADA or alarm interface. The baffle body dampens turbulence. The level switch is well suited for relatively clean water and non-coating or scaling chemical solutions.

Installation: Vertical
Contact type: (1) SPDT reed
Sensor material: PP / PVDF
Process mount: 3/4″ NPT (3/4″ Rp)

 

 

Switch-Tek LO10 Optic Leak Detection Switch

 switch tek lo10

Description

Specification

The general purpose fail-safe optic switch is ideal for detecting leaks or spills in and around secondary containment vessels. Both the submersible probe and cable are constructed of rugged PP or PFA Teflon® for maximum corrosion resistance in harsh environments.

Installation: Universal
Contact type: (1) SPST relay
Sensor material: PP / PFA
Process mount: 3/4″ NPT (3/4″ Rp)

Switch-Tek LP15 SuperGuard Capacitance Switch

 switch tck lp15

Description

Specification

The general purpose guard capacitance level switch is offered in PP with a relay for PLC, SCADA or alarm interface. The guard circuit rejects coating build-up. The level switch is broadly suited for water based conductive liquids with light coating or scaling characteristics.

Installation: Universal
Contact type: (1) SPST relay
Sensor material: PP
Process mount: 3/4″ NPT (3/4″ G)

Switch-Tek LP50 Non-Intrusive Capacitance Switch

 switch tek lp50

Description

Specification

The general purpose non-intrusive capacitance level switch detects liquid through non-metallic tank walls with a relay for PLC, SCADA or alarm interface. The level switch is best suited for aqueous based corrosive or ultrapure liquids that are non-coating or scaling.

Installation: Side wall
Contact type: (1) SPST relay
Enclosure material: PSO
Process mount: Bracket

SwitchPak LM45 Single-Point Level Switch Fitting

switchpak lm45

Description

Specification

The single-point Switch-Pak fitting enables users to install a Flo-Corp level switch through the top wall of the tank to a desired switch point. Offered in PVC, PP and PVDF materials, the fitting is generally applied in bulk storage tanks and waste sumps.

Length: 6″ to 10′ (15cm to 3m)
Adjustablity: None
Fitting material: PVC, PP or PVDF
Process mount: 2″ NPT (2″ G)

SwitchPoint LC92 Remote Relay Level Controller

switchpoint lc92

Description

Specification

CSA general purpose and isolation approved, the remote relay controller is offered in three versions with 1 or 2 relays and 1-3 sensor inputs. The isolation controller has built-in intrinsic safety barriers for use with associated apparatus. The 35 mm DIN rail is panel mounted.

Contact type: (2) SPDT relays
Sensor inputs: (1-3) level switches
Enclosure rating: None
Enclosure mount: 35mm DIN rail

SwitchPoint LC10/11 Compact Relay Level Controller

 switchpoint lc10

Description

Specification

The general purpose compact relay controller is offered in two versions with 1 relay and 1 or 2 sensor inputs. The optional strobe flash alarm brings immediate attention to process conditions. Package the NEMA 4X controller with any of our level switches or installation fittings.

Contact type: (1) SPDT relay
Sensor inputs: (1-2) level switches
Enclosure rating: IP65
Enclosure mount: 3/4″ NPT (3/4″ Rp)

Level Monitors for Remote Monitoring, Data Logging & Display

DigaCom™ 2000 DCX2 Universal Process Display

digacom 2000  dcx2

Description

Specification

DigaCom 2000 Universal Process Display is a field mount display that provides bright, 6-digit LED indication, internal DC power supply for transmitter power, 4-20 mA repeat output and advanced communications. DigaCom features digital push button configuration, simple programming interface, and Ethernet communication. This device is well suited for a variety of process applications. Configure Device, Remotely Monitor, Data Log and Much More with DigaLink™ Interactive Software.

Display: 6-digit, Red LED
Analog Input: 4-20 mA current loop
Analog Output: Isolated 4-20 mA current loop
Enclosure Rating: NEMA 4X (IP65) or NEMA 7
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

DigaCom™ DCX1 Universal Process Display

digacom dcx1

Description

Specification

DigaCom Universal Digital Process Displays are field mount process displays that provide bright, 4-digit LED indication, internal DC power supply for transmitter power, and advanced communications. DigaCom features digital push button configuration, simple programming interface, and Ethernet communication. This device is well suited for temperature, level, and pressure monitoring. Remotely Monitor, Data Log and Much More with DigaLink™ Interactive Software.

Display: 4-digit, Red LED
Analog Input: 4-20 mA current loop
Enclosure Rating: NEMA 4X (IP65)
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

DigaTouch™ DTX1 Advanced Universal Process Display

digatouch dtx1

Description

Specification

DigaTouch Advanced Universal Process Display is a panel or field mount process display that provides bright, 6-digit LED indication, internal DC power supply for transmitter power, and advanced communications. DigaTouch features universal I/O, touch screen interface, dual AC/DC power supply, password protection, and Ethernet communication. This device is well suited for flow monitoring and a variety of process applications. Configure Device, Remotely Monitor, Data Log and Much More with DigaLink™ Interactive Software.

Display: 6-digit, Red LED
Analog Input: 4-20 mA current loop, 0-5 VDC, 1-5 VDC, 0-10 VDC
Enclosure Rating: NEMA 4X (IP65)
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

eXmod™ DXM1 Relay Expansion Module

exmod dxm1

Description

Specification

The eXmod™ is a 4-relay output module that connects to select Universal Process Displays via RS-485 serial communication (4-wire). The eXmod is extremely versatile and can be mounted locally or remotely to allow for a purely distributed system. Display(s) can be mounted in the plant or control panel, while the eXmod can be mounted in the motor control cabinet for reduced cost of control wiring. Additionally, the eXmod’s BIG 10 AMP AC/DC rated replays bring added value to your control/alarm monitoring systems.

Status Indicators: (4) Red LED Relay Indicators
Supply Voltage: 12-24 VDC
Enclosure Rating: NEMA 4X (IP65)
Classification: General Purpose

DigaLink™ 2.0 Configuration & Remote Monitoring Software

 digalink 2.0

Description

Specification

DigaLink™ 2.0 is an interactive software, enabling users to configure and remotely monitor DigaCom & DigaTouch displays from the convenience of  their PC. DigaLink is unique in it’s communication protocol that utilizes both TCP/IP Ethernet communication and Modbus/RS485 serial communication simultaneously. This advanced software features display configuration, datalogging and real-time monitoring of unlimited devices. With DigaLink you can easily setup and monitor the device from practically anywhere.

Operating System: Windows®XP through Windows 7
Unique Feature: Simple device configuration
Communication: Ethernet TCP/IP Communication, Modbus®, RS485 Serial Communication
Data Logging: Historical Trending, Export to Excel, Adjustable time sample

Level Meters & Controllers

DataView II LI55 Advanced Meter and Controller

dataview II

Description

Specification

The DataView II displays engineering units with one 4-20 mA or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 mA repeater.

Display: Bright 6-digit LED main display and secondary unit display with relay status indicators
Input channel: (1) 4-20 mA / 0-10 VDC
Contact type: (2) or (4) SPDT relays
Enclosure mount: Panel (1/8 DIN)

Commander LI90 Advanced Micro PLC Controller

 commander li90

Description

Specification

The Commander PLC can be used in thousands of applications from OEM machine control to machine monitoring in a plant environment, and is ideal for data-logging storage and retrieval.

Display: Backlit graphic LCD display for process visualization
Input channel: 4-20 mA
Contact type: (6) SPDT relays
Enclosure mount: 1/4 DIN panel with 35 mm DIN rail

SwitchPoint LC92 Remote Relay Level Controller

switchpoint lc92

Description

Specification

CSA general purpose and isolation approved, the remote relay controller is offered in three versions with 1 or 2 relays and 1-3 sensor inputs. The isolation controller has built-in intrinsic safety barriers for use with associated apparatus. The 35 mm DIN rail is panel mounted.

Contact type: (2) SPDT relays
Sensor inputs: (1-3) level switches
Enclosure rating: None
Enclosure mount: 35mm DIN rail

SwitchPoint LC10/11 Compact Relay Level Controller

switchpoint lc10

Description

Specification

The general purpose compact relay controller is offered in two versions with 1 relay and 1 or 2 sensor inputs. The optional strobe flash alarm brings immediate attention to process conditions. Package the NEMA 4X controller with any of our level switches or installation fittings.

Contact type: (1) SPDT relay
Sensor inputs: (1-2) level switches
Enclosure rating: IP65
Enclosure mount: 3/4″ NPT (3/4″ Rp)

DISPLAY:

Universal Process Displays, Digital Displays, and Digital Panel Meters

DigaCom™ 2000 DCX2 Universal Process Display

digacom 2000  dcx2

Description

Specification

DigaCom 2000 Universal Process Display is a field mount display that provides bright, 6-digit LED indication, internal DC power supply for transmitter power, 4-20 mA repeat output and advanced communications. DigaCom features digital push button configuration, simple programming interface, and Ethernet communication. This device is well suited for a variety of process applications. Configure Device, Remotely Monitor, Data Log and Much More with

Display: 6-digit, Red LED
Analog Input: 4-20 mA current loop
Analog Output: Isolated 4-20 mA current loop
Enclosure Rating: NEMA 4X (IP65) or NEMA 7
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

DigaCom™ DCX1 Universal Process Display

digacom dcx1

Description

Specification

DigaCom Universal Digital Process Displays are field mount process displays that provide bright, 4-digit LED indication, internal DC power supply for transmitter power, and advanced communications. DigaCom features digital push button configuration, simple programming interface, and Ethernet communication. This device is well suited for temperature, level, and pressure monitoring. Remotely Monitor, Data Log and Much More with DigaLink™ Interactive Software.

Display: 4-digit, Red LED
Analog Input: 4-20 mA current loop
Enclosure Rating: NEMA 4X (IP65) or NEMA 7
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

DigaTouch™ DTX1 Advanced Universal Process Display

digatouch dtx1

Description

Specification

DigaTouch Advanced Universal Process Display is a panel or field mount process display that provides bright, 6-digit LED indication, internal DC power supply for transmitter power, and advanced communications. DigaTouch features universal I/O, touch screen interface, dual AC/DC power supply, password protection, and Ethernet communication. This device is well suited for flow monitoring and a variety of process applications. Configure Device, Remotely Monitor, Data Log and Much More with DigaLink™ Interactive Software.

Display: 6-digit, Red LED
Analog Input: 4-20 mA current loop, 0-5 VDC, 1-5 VDC, 0-10 VDC
Enclosure Rating: NEMA 4X (IP65)
Communication : Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)

eXmod™ DXM1 Relay Expansion Module

 exmod dxm1

Description

Specification

The eXmod™ is a 4-relay output module that connects to select Universal Process Displays via RS-485 serial communication (4-wire). The eXmod is extremely versatile and can be mounted locally or remotely to allow for a purely distributed system. Display(s) can be mounted in the plant or control panel, while the eXmod can be mounted in the motor control cabinet for reduced cost of control wiring. Additionally, the eXmod’s BIG 10 AMP AC/DC rated replays bring added value to your control/alarm monitoring systems.

Status Indicators: (4) Red LED Relay Indicators
Supply Voltage: 12-24 VDC
Enclosure Rating: NEMA 4X (IP65)
Classification: General Purpose

DigaLink™ 2.0 Configuration & Remote Monitoring Software

digalink 2.0

Description

Specification

DigaLink™ 2.0 is an interactive software, enabling users to configure and remotely monitor DigaCom & DigaTouch displays from the convenience of  their PC. DigaLink is unique in it’s communication protocol that utilizes both TCP/IP Ethernet communication and Modbus/RS485 serial communication simultaneously. This advanced software features display configuration, datalogging and real-time monitoring of unlimited devices. With DigaLink you can easily setup and monitor the device from practically anywhere.

Operating System: Windows®XP through Windows 7
Unique Feature: Simple device configuration
Communication: Ethernet TCP/IP Communication, Modbus®, RS485 Serial Communication
Data Logging: Historical Trending, Export to Excel, Adjustable time sample

Process Control Panel Meters and Bright LED Digital Panel Meters

DataView II LI55 Advanced Meter and Controller

dataview II li55

Description

Specification

The new DataView II displays engineering units with one 4-20 mA or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 mA repeater.

Display: Bright 6-digit LED main display and secondary unit display with relay status indicators
Input channel: (1) 4-20 mA / 0-10 VDC
Contact type: (2) or (4) SPDT relays
Enclosure mount: Panel (1/8 DIN)

Process Control Display Accessories

eXmod™ DXM1 Relay Expansion Module

exmod dxm1

Description

Specification

The eXmod™ is a 4-relay output module that connects to select Universal Process Displays via RS-485 serial communication (4-wire). The eXmod is extremely versatile and can be mounted locally or remotely to allow for a purely distributed system. Display(s) can be mounted in the plant or control panel, while the eXmod can be mounted in the motor control cabinet for reduced cost of control wiring. Additionally, the eXmod’s BIG 10 AMP AC/DC rated replays bring added value to your control/alarm monitoring systems.

Status Indicators: (4) Red LED Relay Indicators
Supply Voltage: 12-24 VDC
Enclosure Rating: NEMA 4X (IP65)
Classification: General Purpose

StrobeAlert™ Compact Flash Alarm

strobealert

Description

Specification

Offered in AC and DC powered configurations, the Strobe Alert compact flash alarm brings immediate attention to process conditions. The NEMA 4X alarm is compatible with our round enclosures and is actuated with our level switch, flow switch or controller products.

Supply voltage: 12-36 VDC / 120-240 VAC
Strobe type: Xenon tube
Enclosure rating: IP65
Enclosure material: Polycarbonate

FCAR3 Loop-Powered Analog Relay

fcar3

Description

Specification

The FCAR3 Loop-Powered Analog Relay is a simple, yet affordable solution for any loop-powered device that requires an alarm trip or control set-point. Available in panel or field mount, the FCAR3 can be used to convert 4-20mA current loop signals to high or low alarm signals. The FCAR3 features a trip set-point that is fully adjustable through the entire 4-20mA scale. In addition, this unit can be placed in a series with other devices in a current loop.

Analog: 4-20mA current loop input signal
Peak Current: 400 mA for 10 mps
Enclosure rating: NEMA 7 & 9

Audible Alarm

audible alarms

Description

Specification

This general purpose audible alarm provides any AC/DC alarm output circuit an inexpensive but powerful horn/tone. The small size (1.687” dia.) makes panel mounting easy. The Audible Alarm is broadly selected as a display and controller option.

Voltage: 30-120VAC/VDC
Sound Output: 68dB min. at 2 ft. & 30V; 80dB min. at 2 ft. & 120V
Housing: 6/6 Nylon, Color Black

SYSTEMS:

AccuTank™ Tank Level Monitoring System

FLO-CORP’s AccuTank™ Level Monitoring System is the most economical, precise and innovative remote monitoring system on the market. This affordable system comes with everything you need to configure and remotely monitor tank levels from practically anywhere in the world.

AccuTank™ Radar Level Monitoring System

accutank radar

Description

       Features & Benefits

The AccuTank™ Radar Level System features revolutionary TDR (Time Domain Reflectometry) technology. This advanced system allows for display configuration, remote monitoring, and datalogging at the convenience of your PC. FLO-CORP’s tank level monitoring system is unique in it’s communication protocol that utilizes both TCP/IP Ethernet Communication and Modbus/RS485 serial communication simultaneously.

  • Simple Configuration
  • Remote Monitoring & Real Time Information
  • Monitor Unlimited Devices
  • Advanced TDR Technology
  • Automatic discovery for quick device detection
  • Export data to Microsoft® Excel
  • Ethernet TCP/IP Communication
  • Modbus®
  • RS485 Serial Communication
  • 1.5″ Dead Band

AccuTank™ Ultrasonic Level Monitoring System

accutank ultrasonic

Description

      Features & Benefits

The AccuTank™ Ultrasonic Level System comes with everything you need to configure and remotely monitor tank levels from practically anywhere in the world. The traditional float level sensors, which are mounted inside the tank causing build up on the sensor resulting in inaccurate reads, or worse, tank overflow. The ultrasonic technology allows the sensor to be located on top of the tank allowing for a non-contacting, precise read of liquid level. The FLO-CORP Accutank™ system includes a Universal Process Display, an ultrasonic level sensor specified to your application requirements and DigaLink™ Interactive Software.

  • Easy Installation
  • Ultrasonic Technology
  • Advanced Data Logging
  • Totalizer
  • Monitor Unlimited Devices
  • Automatic Discovery of Devices
  • Ethernet Communication
  • Configure Device via Software
  • Remote Monitoring
  • Real-Time Information
  • Economical